IZS Datasheet
Strobe Illuminator Series
Rev. C
Key Features and Benefits
-
Designed for ITS and Tolling Applications
-
Smart lighting technology - for optimum performance
-
Wide temperature range - operating from -13°F to 140°F (-25°C to 60°C)
-
IP66 ingress protection against extreme moisture
-
NDAA Section 889 compliant for our national security
Specifications
| Item | Specification | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LED Illumination |
Type |
High power LEDs |
||||||||||||||||||||
Flash Activation |
Activated by strobe input (3.3 - 24 VDC, opto-isolated) |
|||||||||||||||||||||
Wavelength (WVLN) |
|
|||||||||||||||||||||
Number of LEDs (N) |
|
|||||||||||||||||||||
Beam Angle (HxV), |
|
|||||||||||||||||||||
Environmental |
Ingress Protection |
IP66 |
||||||||||||||||||||
Operating Temperature |
-13°F to 140°F (-25°C to 60°C) |
|||||||||||||||||||||
Humidity |
0% to 90% RH |
|||||||||||||||||||||
Certifications |
EMC |
FCC Class B/CE |
||||||||||||||||||||
RoHS |
RoHS |
|||||||||||||||||||||
Eye Safety |
IEC62471:
|
|||||||||||||||||||||
NDAA |
NDAA Section 889 compliant |
|||||||||||||||||||||
Physical |
Dimensions |
|
||||||||||||||||||||
Unit Weight* |
|
|||||||||||||||||||||
Material |
Anodized Aluminum |
|||||||||||||||||||||
Color |
Silver |
|||||||||||||||||||||
Interface |
Configuration Communication Protocol |
RS485 |
||||||||||||||||||||
Connectors |
Power - 2-pin male connector |
|||||||||||||||||||||
Signals - 6-pin male connector |
||||||||||||||||||||||
Strobe Input |
3.3 - 24VDC, opto-isolated |
|||||||||||||||||||||
Power |
Input Voltage |
24 VDC** |
||||||||||||||||||||
Power Consumption (measured with 0.5 ms pulse width; 24 VDC input) |
|
|||||||||||||||||||||
Accessories Included |
2-axis outer pan/tilt adjustment bracket |
|||||||||||||||||||||
Power cable, 15 ft (4.6 m) |
||||||||||||||||||||||
Signals cable, 15 ft (4.6 m) |
||||||||||||||||||||||
Accessories Available (depending on site requirements) |
Power Cable |
Power Cable for IZS Illuminator (IZCAB-SPWR) - different lengths |
||||||||||||||||||||
Signals Cable |
Signals Cable for IZS Illuminator (IZCAB-SSIG) - different lengths |
|||||||||||||||||||||
Mounting hardware (in package) |
|
|||||||||||||||||||||
Mounting hardware (packed separately) |
Wall/pole/gantry mounting options |
|||||||||||||||||||||
Power Supply |
Power Supply 24 VDC** |
|||||||||||||||||||||
* Including outer pan/tilt adjustment bracket
** It is recommended to use
an illuminator power supply separate
from the camera’s supply.
Ordering Information
| Product*** | Available Part Numbers**** | Product Description |
|---|---|---|
|
|
IZS Strobe Illuminator |
*** All models come with a 15 ft cable set; different IZCAB-SPWR and IZCAB-SSIG cable lengths can be ordered
**** IZS[1/2/3]- (IR/DR/CL/WL)-10/20/30/H40/60/H120, where:
-
N = 1/2/3 - number of LEDs: 1=30, 2=60, 3=90
-
WVLN = Wavelength/type of LEDs:
-
IR - Infrared
-
DR - Deep Red
-
CL - Cool White (4000K)
-
WL - Warm White (3000K)
-
-
10/20/30/H40/60/H120 - LED beam angle, in degrees:
-
10 = 10x10
-
20 = 20x20
-
30 = 30x30
-
H40 = H40xV15
-
60 = 60x60
-
H120 = H120xV20 (available as IZS2-IR-H120)
-
Standard Package Contents
-
IZS Strobe Illuminator with outer pan/tilt adjustment bracket
-
Power cable
-
Signals cable
-
Mounting hardware may be included in your package, or packed separately, depending on your site’s requirements.
IZS1 Dimensions (mm)
IZS2 Dimensions (mm)
IZS3 Dimensions (mm)
Connector Locations
Power/Signals Pinouts
www.inextechnologies.com |
Americas |
Europe |
Asia and Australia |
© Inex Technologies, LLC - All rights reserved. Specifications are subject to change without notice. All third-party trademarks are the property of their respective owners.
Doc. No. IZS-REV-C-TDSHEET