IZA800GVES User Guide

Click to show the Related Documents table

2. Training and Support

2.1. Training

This document does not take the place of training by Inex Technologies' certified specialists. Contact Inex Technologies to schedule training.

2.2. Support

If you have any questions, please contact our support team via our Inex Technologies Website.

3. Product Description

3.1. Overview

The IZA800GVES VES All-in-one AI Camera System is suitable for open road tolling, ITS and traffic enforcement applications, with different models available for different distances and illumination requirements.

LPR and overview images are captured from dual motorized zoom lenses, then processed by a fast AI GPU. Illumination can be provided from built-in multi-flash illumination or external illuminators. A variety of mounting options are also available.

It has a rugged, all-weather, IP67-compliant, waterproof housing and a protective sunshade.

3.2. Package Contents

image
Figure 1. Package Contents

  • IZA800GVES VES All-in-one AI Camera System

  • Power/LAN cable (for part numbers IZA800GVES-X-XX-CABxxF); different IZCAB-AVES cable lengths can be ordered; can also be constructed using a length of IZ_COMPOSITE_CABLE and the field-mountable connector included: Waterproof outdoor Binder RD24, part no. 99 4218 70 07

  • Illuminator cable (for part numbers IZA800GVES-X-XX-CAB15F);
    different IZCAB-SVES cable lengths can be ordered

If any parts are missing or damaged, please contact Inex Technologies.

3.3. Dimensions

image
image
image
Figure 2. Dimensions

3.4. Specifications

Table 2. Technical Specifications
Item Specification

Supported Analytics

LPR Analytics

Plate Recognition, State of Issue, Type

Vehicle Analytics

Vehicle Detection, Classification, Color, Make; Vehicle Without Plate

Field of View (FOV)

14 ft (H) x 10 ft (V) (4.3 x 3.0 m)

Max Vehicle Speed

Up to 120 mph (193 km/h)

LPR Capture Distance*
(for U.S.A. plates)

  • S - Short distance, 5-35 ft (1.5-11 m)

  • L - Long distance, 30-70 ft (9-21 m)

LPR Illumination

Number of LEDs

  • DR, IR - 15 high power LEDs

  • DRW, IRW - 10 high power LEDs

Wavelength

  • DR - Deep Red

  • IR - Infrared

Beam Angle

  • S- 40°x16°

  • L - 15°x15°

LPR Camera

Shutter Type

Global

Sensor

Sony IMX265

Resolution

3.19 MP - 2048 (H) x 1536 (V)

Lens

  • S - 6-22 mm; Motorized Zoom and Auto-focus

  • L - 12-40 mm; Motorized Zoom and Auto-focus

Video Compression

MJPEG, H.264, H.265

Video Streaming

RTSP Protocol

OV Illumination

Number of LEDs

  • DR, IR - No visible light LEDs

  • DRW, IRW - 5 high power LEDs

Wavelength

  • DR, IR, - N/A

  • DRW, IRW - Visible, Warm White

Beam Angle

  • S - 40°x16°

  • L - 15°x15°

OV Camera

Shutter Type

Global

Sensor

Sony IMX265

Resolution

3.19 MP - 2048 (H) x 1536 (V)

Lens

  • S - 6-22 mm; Motorized Zoom and Auto-focus

  • L - 12-40 mm; Motorized Zoom and Auto-focus

Video Compression

MJPEG, H.264, H.265

Video Streaming

RTSP Protocol

Supported Protocols (for additional protocols, see the RoadView documentation)

Inex HTTP API

LPR Events are reported via protocols such as the Inex HTTP API protocol. Each LPR Event includes metadata and associated images.

Inex Discovery

The Inex Discovery Protocol is used by the IZ Discovery utility to find all devices connected to the LAN. IZ Discovery also enables display and editing of each device’s network settings.

AI Processor

GPU

NVIDIA Maxwell architecture with 128 CUDA® cores

CPU

Quad-core ARM Cortex-A57 MPCore processor

RAM

4 GB 64-bit LPDDR4, 1600MHz 25.6 GB/s

System Storage

MicroSD, 64 GB

Data Storage

SSD, 250 GB

RTC Battery

Maintains real-time clock date and time for 4-6 hours

Rechargeable; Full charge-up time: 12 hours

Environmental

Ingress Protection

IP67

Operating Temperature

-22°F to 140°F (-30°C to 60°C)

Storage Temperature

-22°F to 158°F (-30°C to 70°C)

Humidity

0% - 90% RH, non-condensing

Certifications

EMC

FCC Part 15, subpart B; CE

Interoperability

ONVIF compliant, Profile S

RoHS

RoHS

Impact Protection

IK10 (Vandal-proof)

Eye Safety

IEC62471 Group 1

NDAA

NDAA Section 889 compliant

Physical

Dimensions

(W x H x D) 6.7" x 4.7" x 17.7"
(171 mm x 119 mm x 451 mm)

Weight

9.0 lbs (4.1 kg)

Color

White

Interface

Ethernet

100BASE-TX, 2 pairs, Full Duplex

Connectors

Power/LAN - Waterproof outdoor RD24 6+PE-pin male connector

Illuminator - Waterproof outdoor RD24 6+PE-pin female connector with protective cap

Illuminator Configuration

RS485: A+, B-

Strobe Output

OV Strobe: 5 V isolated

Power

Input Voltage

24 VDC +/- 10%, Class 2 Low-Voltage

Power Consumption

25 W

Accessories Included

Sunshade

Power/LAN Cable Connector**: Waterproof outdoor Binder RD24, part no. 99 4218 70 07

15 ft Power/LAN Cable for VES System (IZCAB-AVES)***

15 ft Illuminator Cable for VES System (IZCAB-SVES)***

Accessories Available

DIN Rail Mount Power Supplies (IZPWR)

DIN Rail Mount Connection Panel (IZPanel)

Composite Cable for VES (IZ_COMPOSITE_CABLE) - different lengths

Power/LAN Cable for VES System
(IZCAB-AVES) - different lengths

Illuminator Cable for VES System (IZCAB-SVES) - different lengths

Different mount options available

External Strobe Illuminator (IZSVES Series)

* LPR Capture Distance is measured from camera to plate
** For part numbers IZA800GVES-X-XX
*** For part numbers IZA800GVES-X-XX-CAB15F

3.5. Connectors on Camera System Housing

If you attach an illuminator cable, secure or remove the connector’s protective cap to prevent it from falling (safety hazard).
image
Figure 3. Underside of the VES Camera System

3.6. Power/LAN Cable Connector Pinout

Table 3. Power/LAN Cable Connector Pinout

image
Pin Power/LAN Wire Color

1

GND

Black

2

+V (24 VDC)

Red

3

LAN TX (+)

White/Orange

4

LAN TX (-)

Orange

5

LAN RX (+)

White/Green

6

LAN RX (-)

Green

image

Drain
(middle terminal)

Silver

3.7. Required Accessories (Not Included)

  • Network (LAN) cabling (typically CAT 5e/6 cable) with metal-body RJ45 connectors. The total length of the cable should not exceed 328 feet (100 meters).

  • The following accessories can be supplied by INEX/TECH. For documentation and part numbers, see Section 1 and Section 3.4.

Table 4. Required Accessories
Item Notes

24VDC power supply (voltage-adjustable)

INEX/TECH model power supply. (If you use an external illuminator, it is recommended to use an illuminator power supply separate from the Camera System’s supply.)

Mounting Hardware (pan-tilt-roll bracket)

Typically on gantry or wall/pole; see the Mounting Hardware documentation for details

Power/LAN cable

Connects the Camera System to power and LAN; IZ Composite Cable or Power/LAN Cable for VES System

DIN Rail Mount Connection Panel

Used to connect the Camera System to the LAN and power supply

When using Inex cables (such as the IZ Composite Cable or the prefabricated Power/LAN Cable), for proper LAN connectivity from the camera via the IZPanel, the maximum cable length is 200 feet.

3.8. Optional Accessories

For documentation and part numbers, see Section 1 and Section 3.4.

  • External Illuminators

  • Prefabricated camera-to-illuminator cables

4. Recognizing Devices with IZ Discovery

The IZ Discovery utility discovers all active devices connected to the network, and displays a list of their network parameters. These devices can include cameras and computers.

See the IZ Discovery User Guide (see Section 1).

5. Using RoadView

RoadView is advanced ALPR software that reads license plates using sophisticated image recognition algorithms, and creates LPR Events.

5.1. Determining the IP Address of the RoadView Computer with IZ Discovery

See the IZ Discovery User Guide (see Section 1).

5.2. Logging In

  1. Open a browser (Chrome or Microsoft Edge). Type in the IP address of the RoadView computer. For example:
    192.168.5.110

  2. You will see the login screen. Enter the default username and password (root, root):

    image
    Figure 4. Logging In to RoadView

  3. You should see the RoadView Live (Journal) tab. See the RoadView ALPR User Guide for instructions for configuring and using RoadView (see Section 1).

5.3. Logging Out

See the RoadView ALPR User Guide (see Section 1) for logout instructions, using the multi-line dropdown menu icon in the upper right corner of the screen.

6. Troubleshooting and Maintenance

6.1. Troubleshooting

See the RoadView ALPR User Guide (see Section 1).

6.2. Checking Mounting Screws

It is recommended to check all mounting screws for proper tightness once every two years.

6.3. Cleaning the Camera System

Do not use solvents or strong abrasive detergent when cleaning the Camera System. Use a soft dry cloth to clean the Camera System’s front glass when it is dirty. If the dirt has hardened, remove it using mild soap and water, and then wipe the front window gently.

7. Notices, Safety Precautions and Certifications

7.1. Notice

Inex Technologies reserves the right to improve and enhance its product offerings. Thus, the illustrations and descriptions presented in this manual may differ in some respect from the products you receive.

Technical specifications are subject to change without notice.

In addition, please note that some figures are not drawn to scale, in order to illustrate the addressed issue more effectively.

All third-party trademarks are the property of their respective owners.

Inex Technologies cannot be held liable for technical and editorial omissions or errors made in this document; nor for incidental or consequential damages resulting from the furnishing, performance or use of this document.

Actions or circumstances that void the warranty are improper usage, improper handling without adequate electrostatic discharge (ESD) protection, defects resulting from natural disaster (fire, flood etc.) and unauthorized modifications or repair.

Power undervoltage, overvoltage and/or incorrect polarity will damage the unit and will void the warranty.

It is your responsibility to ensure that all wires connected to Inex Technologies' products have appropriate surge protection. Any damage due to electrical spikes (for example, lightning) is not covered by the warranty.

No part of this document may be reproduced in any form without permission from Inex Technologies.

7.2. Safety Precautions

BEWARE OF RISK OF ELECTRICAL SHOCK

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This product must be used in compliance with local laws and regulations.

All network cable extensions and repeaters must be shielded.

Power undervoltage, overvoltage and/or incorrect polarity will damage the unit and will void the warranty.

  • Please read this guide carefully before installing the VES Camera System.

  • Keep this guide for future reference.

  • Do not disassemble the VES Camera System or external illuminator units. Repair or replacement of parts for this VES Camera System and its external illuminator units should be supplied by Inex Technologies, and installed by qualified service personnel.

  • Handle and store the VES Camera System and external illuminator units with care.

  • Never point the VES Camera System directly towards the sun.

  • Do not allow water (e.g. rain) to enter the VES Camera System.

  • Do not handle the VES Camera System or external illuminator units unless you have adequate electrostatic discharge (ESD) protection; otherwise, the warranty will be void.

  • You must request that your Inex Technologies-certified service technician install lightning and electrical surge protection on all wiring connected to Inex Technologies' products. The warranty does not cover surge or lightning protection.

  • Do not use the VES Camera System or external illuminator units outside of their temperature, humidity and power source ratings as noted in their respective technical specifications.

  • To avoid heat accumulation/overheating, use sufficient ventilation in the product’s operating environment.

  • Do not connect several devices to one power adapter since adapter overload may cause overheating or a fire hazard.

  • Stop using the unit immediately if it emits smoke, or if you notice an abnormal smell or sound. In such cases, please contact us. Do not attempt to repair the unit by yourself!

  • The use of any Inex Technologies' software products or any other software product referred to in this document with internet access shall be used wholly at your own risk. Inex Technologies does not take any responsibility for abnormal operation, privacy leakage or any other damages resulting from cyber attack, hacker attack, virus infection or any other internet security risks.

  • Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

  • Eye Safety: The following precautions must be observed:

    • Do not stare directly into the front of the VES Camera System while it is operating.

    • IZA800GVES - IEC62471 Group 1:

Eye Safety Group 1 Warning Label

7.3. Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL OUR COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

THE USE OF ANY Inex Technologies' SOFTWARE PRODUCTS OR ANY OTHER SOFTWARE PRODUCTS REFERRED TO IN THIS DOCUMENT WITH INTERNET ACCESS SHALL BE USED WHOLLY AT YOUR OWN RISK. Inex Technologies DOES NOT TAKE ANY RESPONSIBILITY FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR ANY OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INFECTION OR ANY OTHER INTERNET SECURITY RISKS.

For details, see the Inex Software End User License Agreement.

7.4. Regulatory Notices

  • FCC Conformance:
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • CE Logo ROHS Logo EU Conformity Statement:
    This product and - if applicable, the supplied accessories - are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, and the RoHS Directive 2002/95/EC.

  • IP67 Ingress Protection:
    This product conforms to the IP67 standard.

  • ONVIF Logo ONVIF:
    This device is ONVIF compliant (Profile S).

  • IK10 Logo IK10:
    This device has been tested and conforms to the IK10 impact standard (vandal-proof).

© Inex Technologies, LLC - All rights reserved.

Doc. No. IZA800GVES-MAN-002a Ver. 2024-07-01