IZA800GORT Quick Start Guide

Click here for full documentation and software.

You will need: Laptop with Windows 10 or above with Windows Feature NET 4.5 enabled.
Chrome or Microsoft Edge browser.
After mounting, remove the protective film from the camera’s front window.
You can use IZ Discovery to find the desired camera and change its network settings

Checklist

  • Prepare components and tools

  • Plan your site

  • Prepare cables

  • Install Camera System(s) and other components

  • Connect components (wiring)

  • Power up and set up IP

  • Configure LPR/OV camera settings

  • Aim and calibrate

  • Verify system operation


The torques required to connect the cable connectors to the connectors on the Camera System are as follows: Power/signals cable: 3-4 kgf.cm / 0.29-0.39 N.m. LAN cable: 5-8 kgf.cm / 0.49-0.78 N.m.

Front Camera with Illuminator Wiring Diagram (Infrared Light)

image


Rear Camera with Illuminator Wiring Diagram (White Light)

image

Camera Wiring Diagram

image

Legend

Item Description Ordering Information

A

LAN Cable for IZA800G System*

Inex P/N: IZCAB-A800-LAN

B

Power/Signals Cable for IZA800G System*

Inex P/N: IZCAB-A800-PAS

C

Power Supply: 24 VDC, 100/120W; DIN rail mount
Can power 2 cameras from a single power supply

Inex P/N: IZPWR120-24-MWL-DIN

D

Illuminator Power Cable*

Inex P/N: IZCAB-SPWR-15F

E

Illuminator Signals Cable*

Inex P/N: IZCAB-SSIG-15F

F

IZS Strobe Illuminator (Infrared Light-Front Capture)

Inex P/N: See the IZA800GORT Installation Guide for a table of Camera-to-Illuminator Recommended Setups

G

IZS Strobe Illuminator (White Light-Rear Capture)

Inex P/N: See the IZA800GORT Installation Guide for a table of Camera-to-Illuminator Recommended Setups

* Different lengths can be ordered

© Inex Technologies, LLC - All rights reserved. Specifications are subject to change without notice. All third-party trademarks are the property of their respective owners.

Doc. No. IZA800GORT-TECH-001 Ver. 2024-07-01